This is an airbrush for modeling use.
Tamiya's Spray-Work Airbrush Set which came out in 1988 and was well received for its easy use and effectiveness when spraying camouflage and gradation patterns, has now evolved to the next level. The compressor now comes in convenient case form, and operating noise has been considerably reduced. This new set also features improved spray stability and control. With a nozzle diameter of 0.3mm, beginners should find the airbrush easy to use. From 2mm-thin lines to base coat, this set can be used with ease to paint a variety of surfaces. Compressor uses re-chargeable 7.2V Battery Pack (Sold separately).Compressor StatisticsSize: length-220mm, width-105mm, height-138mm, compressor weight: approx. 800g. Maximum continuous running time with 7.2V battery: approx. 20min. (1400mAh)- approx. 30min. (1700mAh) Maximum air-pressure: approx. 0.11Mpa (approx. 1.1kgf/) Maximum air output: 20 liters per minute (unburdened). Noise level: 68db.
When used with the separately available adaptor (linked below), please understand that it requires the Japanese standard AC100V outlet, so you may need a power adaptor to use this device in countries other than Japan. Check with your local electronics shop for details.
Important! As packaged, this compressor is not powered and cannot be used without either the Tamiya 7.2v battery pack or the AC adaptor as described above and linked below.